Gasmet Việt Nam- Gas Analyser

Thứ Hai, 22 tháng 12, 2014

Calibration ( thiết bị hiệu chuẩn đo khí) Gasmet- Gasmet Việt Nam

STC TRADING SERVICE CO., LTD

110 Hoa Cuc Street, Ward 7, Phu Nhuan District, HCMC

Regards,

Mr.Hòa
[Senior Sales Eng. ]

[Cellphone]: 0973.940.975

01273.991.622

[Email]: hoa@songthanhcong.com

[Yahoo]: Sagittarius_1610

[Skype]: hoadinh_stc

THƯ NGỎ - STC VIỆT NAM

Công ty TNHH TM DV Song Thành Công (STC) chúng tôi luôn tự hào là một trong những nhà cung cấp vật tư và thiết bị hàng đầu chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển toàn bộ hệ thống hoạt động của nhà máy, xí nghiệp hay các sản phẩm của công nghệ cao và chất lượng.

Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Cảm biến, Encoder, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…

Gasmet calibrator

Gasmet portable calibrator is one of the most important tools in generating new applications for the Gasmet FTIR gas analyzer. The calibrator incorporates a syringe pump, a manual needle valve, a mass flow meter, and a stainless steel injection chamber. The syringe pump injects precise amounts of liquid or gas into a hot nitrogen gas flow, thus producing a continuous flow of a known concentration calibration gas.

Technical Data

Heated line
Length:	One (1) meter
Maximum temperature:	200 ºC
Tubing:	Replaceable PTFE tubes
Tube size:	4 mm ID

Mass flow meter
Maximum gas flow:	Five (5) liters per minute
Display:	Digital, LCD

Syringe pump
Liquid flow:	0.2 µl/h - 400 ml/h
Accuracy:	± 0.5%

Syringe
Size:	1 ml and 5 ml gas-tight

Heated injection chamber:
Max temperature:	180 ºC
Material:	ss 316

Temperature controllers (2 pieces)
Model:	Cal Controls, CAL 3300

Enclosure
Case:	500 mm * 340 mm * 200 mm
Weight:	12 kg
Mechanical bench:	Description below

Electrical connectors:
Power connection:	Standard plug CEE-22
Power consumption:	300 W with one meter heated line

Portable Sampling Unit ( thiết bị lấy mẫu khí) Gasmet- Gasmet Việt Nam

STC TRADING SERVICE CO., LTD

110 Hoa Cuc Street, Ward 7, Phu Nhuan District, HCMC

Regards,

Mr.Hòa
[Senior Sales Eng. ]

[Cellphone]: 0973.940.975

01273.991.62201273.991.622

[Email]: hoa@songthanhcong.com

[Yahoo]: Sagittarius_1610

[Skype]: hoadinh_stc

THƯ NGỎ - STC VIỆT NAM

Gasmet portable sampling unit

The Gasmet portable sampling unit has been designed for portable emission monitoring measurements.

The Gasmet portable sampling unit is used for on-site measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and valve are located in a module that is heated to 180 ºC. From the Sampling Unit the gases can be directed into Gasmet FTIR gas analyzer.

Technical Data

Portable Sampling Unit

General parameters
Operating temperature:	20 ± 20 °C, non condensing
Storage temperature:	-20 – 60 °C, non condensing
Power supply:	Separate models for 100-115 and 230 V / 50 -60 Hz
Power consumption:	400 - 3600 W, depending of the sample lines (without sample probe)

Heated sample pump
Material:	316 SS
Diaphragms:	Teflon
Maximum flow:	~4 l/min, constant
Temperature:	180 °C, maximum

Heated filter
Material:	Bonded microfiber (sintered steel 0.1µ as an aoption)
Gas filtration:	Filtration of particulates 2 µm
Temperature:	180 ºC

Temperature controllers
Material temperature range:	0 – 180 ºC
Display:	Digital, 3 digits

Valves
Pressure:	0 - 2 bars
Temperature:	60 ºC maximum
Valves:	Sample gas / zero gas

Gas connectors
Sample gas inlet:	One piece, 6 mm Swagelok
Sample gas outlet:	One piece, 6 mm Swagelok
Zero gas inlet:	One piece, 6 mm Swagelok

Electrical connectors
Power connection:	CEE7 standard European Schuko plug or fixed cable

Enclosure
Material:	SS 316
Dimensions (mm):	400 x 300 x 210 mm
Weight:	12.3 kg
CE label:	EMI guideline 89/336/EC

Optional oxygen sensor
The O2 concentration reading can be displayed on the Calcmet software
Principle:	ZrO₂ cell
Measuring range:	0.1 – 25 %
Accuracy:	< 2% from FS
Calibration:	Single point calibration with air

Optional heated line
Tube size:	4 mm, inner diameter
Core material:	Teflon core
Operating pressure:	Maximum 400 kPa
Temperature:	Maximum 200 ºC
Fittings:	6 mm Swagelok
Power supply:	230 VAC or 115 VAC
Power density:	120 Watts /meter
The maximum length of the heated line is 19 m + 1 m (230 VAC) and 9 m + 1 m (115 VAC).

Optional sample probe
Sample probe: PSP4000H Power density: Operating temperature: Filter element: Dust loadings:	320 watts 0 – 180 ºC Ceramic 2 μm < 2 g/m3
Probe tube material: SS 316 Viton Probe length: Sample temperature: Sample pressure:	One (1) meter 600 ºC maximum 1 bar maximum
Other probes for high temperatures and for high dust loadings.

Gasmet Technologies Oy shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. Should you find any errors, we would appreciate if you notified us.

Thứ Năm, 18 tháng 12, 2014

CR1000 FTIR Gas Analyzer ( đo nông đợ khí) Gasmet- Gasmet Việt Nam

STC TRADING SERVICE CO., LTD

110 Hoa Cuc Street, Ward 7, Phu Nhuan District, HCMC

Regards,

Mr.Hòa
[Senior Sales Eng. ]

[Cellphone]: 0973.940.975

01273.991.62201273.991.622

[Email]: hoa@songthanhcong.com

[Yahoo]: Sagittarius_1610

[Skype]: hoadinh_stc

THƯ NGỎ - STC VIỆT NAM

Technical Data

CR1000 FTIR Gas Analyzer

General Parameters
Measuring principle:	Fourier Transform Infrared, FTIR
Performance:	Simultaneous analysis of up to 50 gas compounds
Response time, T₉₀:	Typically < 2 s, depending on the gas flow and measurement time
Operating temperature:	5 - 30°C non-condensing
Storage temperature:	-20 - 60°C, non-condensing
Power supply:	100-115 or 230 V / 50 -60 Hz
Power consumption:	300 W maximum, continuous 150 W

Spectrometer
Resolution:	Recommended 8 cm^-1 or 4 cm^-1
Scan frequency:	10 scans / s or faster
Detector:	Liquid N₂ cooled MCT
Source:	SiC, 1550 K
Optics material:	ZnSe (beamsplitter and windows)
Wave number range:	600 - 4200 cm^-1

Sample cell
Structure:	Single-pass, path length 10 cm
Standard material:	Stainless steel, ss 316
Volume:	0.031 liters
Connectors:	Inlet Swagelok 6 mm Outlet Swagelok 8 mm
Gaskets:	Viton® O-rings
Temperature:	180 °C
Window material:	ZnSe, other on request

Measuring parameters
Zero point calibration:	24 hours, calibration with nitrogen (4.0 or higher N₂ recommended)
Zero point drift:	< 2 % of measuring range per zero point calibration interval
Sensitivity drift:	None
Linearity deviation:	< 2 % of measuring range
Temperature drifts:	< 2 % of measuring range per 10 K temperature change
Pressure influence:	1 % change of measuring value for 1 % sample pressure change. Ambient pressure changes measured and compensated

Electrical connectors
Digital interface:	9-pole D-connector for RS-232 CR1000 is connected to an external computer via RS-232C cable. The external computer controls the Gasmet analyzer.
Power connection:	Standard plug CEE-22

Gas inlet and outlet conditions
Gas temperature:	Non-condensing, the sample gas temperature should be the same as the sample cell temperature
Flow rate:	120 - 600 liters per hour
Gas filtration:	Filtration of particulates (2 µ) required
Sample gas pressure:	Ambient
Sample pump:	External, not included

Electronics
A/D converter:	Dynamic range 95 dB
Signal processor:	32-bit floating point DSP 120 MFLOPS
Computer:	External, not included

Analysis software (for external PC)
Operating system:	Windows XP
Analysis software:	Calcmet for Windows

Options
Sample cell:	Single-pass, path length 1 cm volume 0.003 liters and 4 cm volume 0.013 liters
External PC:	Gasmet PC
Sample cell gaskets:	Teflon® coated Viton® or Kalrez®
Sample cell material:	Inconell

Enclosure
Material:	Aluminium
Dimensions:	512 mm * 473 mm * 311 mm
Weight:	22 kg
CE label:	According to EMI guideline 89/336/EC