DX4000 FTIR Gas Analyzer ( đo nồng độ khí) Gasmet- Gasmet Vietnam

STC TRADING SERVICE CO., LTD 

                110 Hoa Cuc Street, Ward 7, Phu Nhuan District, HCMC

Regards,

Mr.Hòa
[Senior Sales Eng. ]

[Cellphone]: 0973.940.975

                01273.991.62201273.991.622 

[Email]: hoa@songthanhcong.com

[Yahoo]: Sagittarius_1610

[Skype]: hoadinh_stc

THƯ NGỎ - STC VIỆT NAM

Công ty  TNHH TM DV Song Thành Công (STC) chúng tôi luôn tự hào là một trong những nhà cung cấp vật tư và thiết bị hàng đầu chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển toàn bộ hệ thống hoạt động của nhà máy, xí nghiệp hay các sản phẩm của công nghệ cao và chất lượng.

Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Cảm biến, Encoder, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…

Technical DataDX4000 FTIR Gas Analyzer

General parameters
Measuring principle:	Fourier transform infrared, FTIR
Performance:	Simultaneous analysis of up to 50 gas compounds
Response time, T90:	Typically < 120 s, depending on the gas flow and measurement time
Operating temperature:	Short term 0 - 40°C long term 5 - 30°C non-condensing
Storage temperature:	-20 - 60°C, non-condensing
Power supply:	100-115 or 230 V / 50 -60 Hz
Power consumption:	Average 150 W, maximum 300 W

Spectrometer
Resolution:	8 cm-1 or 4 cm-1
Scan frequency:	10 scans / s
Detector:	Peltier cooled MCT
Source:	SiC, 1550 K
Beamsplitter:	ZnSe
Window material:	ZnSe
Wave number range:	900 - 4 200 cm-1

Sample cell
Structure:	Multi-pass, fixed path length 5.0 m
Material:	100 % rhodium coated aluminium
Mirrors:	Fixed, protected gold coating
Volume:	0.4 liters
Connectors:	Inlet Swagelok 6 mm Outlet Swagelok 8 mm
Gaskets	Viton® O-rings
Temperature:	180 °C, maximum
Window material:	BaF2

Measuring parameters
Zero point calibration:	24 hours, calibration with nitrogen (4.0 or higher N2 recommended)
Zero point drift:	< 2 % of measuring range per zero point calibration interval
Sensitivity drift:	None
Linearity deviation:	< 2 % of measuring range
Temperature drifts:	< 2 % of measuring range per 10 K temperature change
Pressure influence:	1 % change of measuring value for 1 % sample pressure change. Ambient pressure changes measured and compensated

Electrical connectors
Digital interface:	9-pole D-connector for RS-232 Analyzer is connected to an external computer via RS-232C cable. The external computer controls Gasmet. Remote control connection for Portable sampling unit
Power connection:	Standard plug CEE-22
PSS connection:	Remote connection of PSS (Portable Sampling System)

Gas inlet and outlet conditions
Gas temperature:	Non-condensing, the sample gas temperature should be the same as the sample cell temperature
Flow rate:	120 - 600 liters per hour
Gas filtration:	Filtration of particulates (2 µm) required
Sample gas pressure:	Ambient
Sample pump:	External, not included

Electronics
A/D converter:	Dynamic range 95 dB  32-bit floating point DSP
Signal processor:	120 MFLOPS speed
Computer:	External, not included

Analysis software (for external PC)
Operating system:	Windows XP
Analysis software:	Calcmet for Windows

Options
Sample cell:	Multi-pass, fixed path length 2.5 m or 9.8 m
Pressure measurement:	Inside sample cell
Analog signals (ext PC):	ADAM 5000/TCP module (for analog inputs, outputs, relays)
Sample cell gaskets:	Teflon® coated Viton® or Kalrez®
Trolley:	Wheeled cart for the analyzer and laptop computer

Enclosure
Material:	Aluminium
Dimensions (mm):	390 * 445 * 164
Weight:	13.9 kg
CE label:	According to EMI guideline 89/336/EC

Gasmet Technologies Oy shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. Should you find any errors, we would appreciate if you notified us.