Portable Sampling Unit ( thiết bị lấy mẫu khí) Gasmet- Gasmet Việt Nam

STC TRADING SERVICE CO., LTD 

                110 Hoa Cuc Street, Ward 7, Phu Nhuan District, HCMC

Regards,

Mr.Hòa
[Senior Sales Eng. ]

[Cellphone]: 0973.940.975

                01273.991.62201273.991.622 

[Email]: hoa@songthanhcong.com

[Yahoo]: Sagittarius_1610

[Skype]: hoadinh_stc

THƯ NGỎ - STC VIỆT NAM

Công ty  TNHH TM DV Song Thành Công (STC) chúng tôi luôn tự hào là một trong những nhà cung cấp vật tư và thiết bị hàng đầu chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển toàn bộ hệ thống hoạt động của nhà máy, xí nghiệp hay các sản phẩm của công nghệ cao và chất lượng.

Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Cảm biến, Encoder, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…

Gasmet portable sampling unit

The Gasmet portable sampling unit has been designed for portable emission monitoring measurements.

The Gasmet portable sampling unit is used for on-site measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and valve are located in a module that is heated to 180 ºC. From the Sampling Unit the gases can be directed into Gasmet FTIR gas analyzer.

Technical Data

Portable Sampling Unit

General parameters
Operating temperature:	20 ± 20 °C, non condensing
Storage temperature:	-20 – 60 °C, non condensing
Power supply:	Separate models for 100-115 and 230 V / 50 -60 Hz
Power consumption:	400 - 3600 W, depending of the sample lines (without sample probe)

Heated sample pump
Material:	316 SS
Diaphragms:	Teflon
Maximum flow:	~4 l/min, constant
Temperature:	180 °C, maximum

Heated filter
Material:	Bonded microfiber (sintered steel 0.1µ as an aoption)
Gas filtration:	Filtration of particulates 2 µm
Temperature:	180 ºC

Temperature controllers
Material temperature range:	0 – 180 ºC
Display:	Digital, 3 digits

Valves
Pressure:	0 - 2 bars
Temperature:	60 ºC maximum
Valves:	Sample gas / zero gas

Gas connectors
Sample gas inlet:	One piece, 6 mm Swagelok
Sample gas outlet:	One piece, 6 mm Swagelok
Zero gas inlet:	One piece, 6 mm Swagelok

Electrical connectors
Power connection:	CEE7 standard European Schuko plug or fixed cable

Enclosure
Material:	SS 316
Dimensions (mm):	400 x 300 x 210 mm
Weight:	12.3 kg
CE label:	EMI guideline 89/336/EC

Optional oxygen sensor
The O2 concentration reading can be displayed on the Calcmet software
Principle:	ZrO2 cell
Measuring range:	0.1 – 25 %
Accuracy:	< 2% from FS
Calibration:	Single point calibration with air

Optional heated line
Tube size:	4 mm, inner diameter
Core material:	Teflon core
Operating pressure:	Maximum 400 kPa
Temperature:	Maximum 200 ºC
Fittings:	6 mm Swagelok
Power supply:	230 VAC or 115 VAC
Power density:	120 Watts /meter
The maximum length of the heated line is 19 m + 1 m (230 VAC) and 9 m + 1 m (115 VAC).

Optional sample probe
Sample probe: PSP4000H Power density: Operating temperature: Filter element: Dust loadings:	320 watts 0 – 180 ºC Ceramic 2 μm < 2 g/m3
Probe tube material: SS 316 Viton Probe length: Sample temperature: Sample pressure:	One (1) meter 600 ºC maximum 1 bar maximum
Other probes for high temperatures and for high dust loadings.

Gasmet Technologies Oy shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. Should you find any errors, we would appreciate if you notified us.